Forge Motorsport Parts stocked in Brisbane for Hyundai i30n, Kona N, i20n
Forge Motorsport Upgrades Brisbane
Forge Motorsports offers some of the best performance upgrades available in the world of Hyundai Tuning and as a QLD dealer, we are able to supply and fit Forge Motorsport’s wide range of products specifically tailored for Hyundai vehicles right here in Brisbane. Check out Forge Motorsport’s range of Hyundai upgrades below.
Forge Motorsport Intercooler Upgrade Kits for i30n
Available for:
The Forge Motorsport Intercooler is designed to keep Intake Air Temperature at a safe level and prevent the stock ECU from pulling out the engine’s timing, which can result in a loss of power. The bar and plate core has over 129% more volume and an increase of frontal surface area of over 71% compared to the stock cooler, making the Forge Motorsport Intercooler the largest currently available on the market. To ensure optimum cooling efficiency, the Forge Motorsport development team has also created a fabricated ducting system that has been skilfully integrated into the superior design of this product. If you use your i30N for fast road applications or have a high-performance tune in a hot climate, the Forge Motorsport Intercooler is essential.
Forge Oil Catch Can Kits for Hyundai i30n
Available for:
The Forge Motorsport Twin Catch Can and Coolant Expansion Tank System is a direct replacement for the OE coolant expansion tank. It offers an effective solution for reducing sludge and carbon build-up to allow the engine to both breathe and perform more efficiently. This kit filters both PCV and intake breather systems to help keep your engine clean by collecting harmful contaminants, including oil deposits, unused fuel vapours and moisture, which would ordinarily make their way back through to the inlet of the engine. If you are planning for more advanced power tuning in the future, this product is a must.
Forge Oil Cooler Kits for Hyundai i30n
Available for:
The Forge Motorsport Oil Cooler Kit is a must-have upgrade for anyone with a performance or race-tuned Hyundai i30N. Rising oil temperature during spirited driving or under race conditions will result in a drop in the lubrication efficiency of your engine’s internal components, leading to engine fatigue and potentially internal component damage. The Forge Oil Cooler Kit adds an oil cooler radiator at the front of the vehicle’s radiator grill to allow for superior airflow, resulting in the reduction of oil temperatures. This kit also keeps the factory oil-to-water cooler in place, essentially doubling your engine’s oil cooling.
Forge Induction Kits for Hyundai i30n and i20n
Available for:
Forge Motorsport Induction Kits improve airflow by routing air more directly into your engine, and utilising a high-flow, high-efficiency air filter in place of the more restrictive factory air filter, resulting in consistent power gains throughout the rev range without any loss of low-end torque.
Forge Turbo Inlets for Hyundai i30n and i20n
Available for:
- Hyundai i30N 2018-2021
- Hyundai i30N 2021-On (Facelift), Hyundai i30N Sedan, Hyundai Kona N
- Hyundai i20N
The rather restrictive inlet pike factory-fitted to the Hyundai N models is one of the weak links in this otherwise very well-sorted performance car range. The Forge Motorsport Turbo Inlet fixes this problem by improving the airflow into the turbo. Designed in a similar way to a conventional velocity stack, it routes the air more directly into your turbocharger and allows more air to be compressed due to its larger capacity. This can have a positive effect on accelerating your vehicle after long deceleration or between gear changes due to more air being kept within the intake system.
Hyundai i30n Forge Blow Off Valves
Available for:
The Forge Motorsport Blow-Off Valve is the industry-leading valve for Hyundai N vehicles, utilising an unrivalled design that uses a boost-to-side entry on the valve meaning, unlike our competitors, the valve cannot lift under high or low boost applications. The advantage of this eliminates the need to change the valve’s internal spring rate to a higher tension when tuning the vehicle. This valve can be used either as a fully atmospheric (blow-off) valve, or a recirculating valve.
Short Shifters
Available for:
The Forge Motorsport Short Shifter Kit has been developed in conjunction with Forge Motorsport’s work on the BTCC championship-winning Hyundai i30Ns to offer a short, crisp, and precise gear changing experience.
Coolant Hose Kits
Available for:
The Forge Motorsport Coolant Hose Kit includes a set of six coolant hoses for the Hyundai I30N which replace six of the OEM rubber hoses in the coolant system. Forge has designed these silicone hoses to withstand the kind of pressures that can be experienced on tuned and remapped engines. They will long outlast the original hoses and with our limited lifetime warranty on all Forge products, you can be sure these hoses won’t let you down.
For more info on Forge Motorsport products, contact the team at Hyundai Tuning today and take your Hyundai to the next level.
